Chine API 6A FMC weco fig600 6000psi 1 1/2 '' - 4 '' Hammer Union Fabricants

toutes catégories

nouveaux produits

Accueil > Liste de Produits > Pièces de rechange pour champs de pétrole > Raccords de tuyauterie > API 6A FMC weco fig600 6000psi 1 1/2 '' - 4 '' Hammer Union

API 6A FMC weco fig600 6000psi 1 1/2 '' - 4 '' Hammer Union

Informations de base

Modèle: hammer union

Description du produit

Description du produit API 6A FMC weco fig600 6000psi 1 1/2 '' - 4 '' Hammer Union

Le Hammer Union peut être utilisé pour cimenter des camions, toutes sortes de collecteurs et autres équipements haute pression, et des tuyaux. C'est un élément important pour le transport du pétrole. Eau, fluide de fracturation et fluide mélangé. Ces produits sont tous en acier de haute qualité par forgeage et finition de coupe. Ils ont du bien. Performances mécaniques et propriétés d'étanchéité. En particulier, ils peuvent fonctionner sous les intempéries. Ils peuvent être assemblés fixés facilement et commodément. Principal numéro de modèle technique de collecte de norme de pression de travail, diamètre de dérive de longueur structurelle. Le produit adopte certaines connexions finales du fil de pipeline, du fil de tube, de la soudure bout à bout.

Le type Hammer Union se compose principalement de la Figure 100, Figure 200, Figure 206, Figure 300, Figure 400, Figure 600, Figure 602, Figure 1002, Figure 1003, Figure 1502 et Figure 2002, figure 2202

Hammer Union

Nous pouvons fournir divers syndicats de marteaux en fonction des technologies introduites d'un autre pays, y compris le type de connexion de fil, le type de soudage et les unions de service H2S.1 "-6" et CWP de 1000psi-20,000psi sont disponibles. Pour une identification facile, des unions avec différents Les notes de pression seront peintes en différentes couleurs, et il existe des marques évidentes indiquant la taille, le mode de connexion et les cotes de pression.

Les joints d'étanchéité sont composés de composés de caoutchouc de qualité qui améliorent considérablement la capacité de charge et les performances d'étanchéité et protègent les connecteurs de l'érosion. Les pressions et applications différentes présentent une méthode d'étanchéité différente.

Installation rapide

Partout où ils se trouvent, les écrous à oreilles et ACME droit assureront une installation ou un démontage rapide sans outils spéciaux.

Très interchangeable

Tous les syndicats sont fabriqués dans le système américain et peuvent être échangés avec des produits sur le marché international.

Les bagues de joint sont entièrement interchangeables avec des produits équivalents;

Les marques de taille et de pression dans les écrous sont formées dans le modèle de forage, identique aux produits internationaux.

Certificat d'honneur

Nos produits ont été certifiés ISO9001 et ont obtenu les approbations API 6A, 6D, API 7,7K et API 16A et 16C d'American Petroleum Institute. Tous les produits sont entièrement conçus et fabriqués conformément à API, ANSI, GB (normes nationales) et SY (industrie Normes).


Nominal pipe Size:2”, 2-1/2”, 3”, 4” , 6” , 8”; Pressure Rating:1000psi cwp;1500 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service Manifold and line connections. Features Pressure-tight make-up with hammer; Economical, low-pressure union

Nominal pipe Size:2”, 2-1/2”, 3”, 4” , 6” , 8”;
Pressure Rating:1000psi cwp;1500 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Manifold and line connections.
Features
Pressure-tight make-up with hammer;

Economical, low-pressure union

Figure 200 Hammer Union
Nominal pipe Size:1”, 1-1/4”, 1-1/2”,2”, 2-1/2”,3”, 4”; Pressure Rating:2000psi cwp;3000 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service General-service manifolds and lines. Features Economical, general-purpose union; Butt-weld available.

Figure 206 Hammer Union
Nominal pipe Size:1”, 2”, 3”,4”,6”,8”, 10”; Pressure Rating:2000psi cwp;3000 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service Manifold and line connections, suction service, and corrosion service. Features O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion; Replaceable O-ring extends union service life.

Figure 206 Hammer Union

Nominal pipe Size:1”, 2”, 3”,4”,6”,8”, 10”;
Pressure Rating:2000psi cwp;3000 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Manifold and line connections, suction service, and corrosion service.
Features
O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion;
Replaceable O-ring extends union service life.

Figure 400 Hammer Union
Nominal pipe Size:2”, 2-1/2”, 3”,4”,6”,8”,10”,12”; Pressure Rating:4000psi cwp;6000 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service Manifold and line connections, pump suction, and mud service. Features 2-1/2” through 12” sizes have O-rings for primary seal; Butt-weld available.

Figure 400 Hammer Union

Nominal pipe Size:2”, 2-1/2”, 3”,4”,6”,8”,10”,12”;
Pressure Rating:4000psi cwp;6000 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Manifold and line connections, pump suction, and mud service.
Features
2-1/2” through 12” sizes have O-rings for primary seal;
Butt-weld available.

Figure 600 Hammer Union
Nominal pipe Size:1”, 2”, 3”, 4”; Pressure Rating:6000psi cwp;9000 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service Steam service, boiler connections, manifold, and line connections for production, drilling, and well servicing. Features Bronze seat provides primary seal; will not rust in water services.

Figure 600 Hammer Union

Nominal pipe Size:1”, 2”, 3”, 4”;
Pressure Rating:6000psi cwp;9000 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Steam service, boiler connections, manifold, and line connections for production, drilling, and well servicing.
Features
Bronze seat provides primary seal; will not rust in water services.

Figure 602 Hammer Union
Nominal pipe Size:1”, 2”, 3”, 4”; Pressure Rating:6000psi cwp;9000 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service Manifold and line connections and mud service. Features Compact; Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence; Butt-weld available

Figure 602 Hammer Union

Nominal pipe Size:1”, 2”, 3”, 4”;
Pressure Rating:6000psi cwp;9000 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Manifold and line connections and mud service.
Features
Compact;
Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence;

Butt-weld available

Figure 1002 Hammer Union
Nominal pipe Size:1”, 2”, 3”, 4”,5”,6”; Pressure Rating: 1” to 4” 10000psi cwp;15000 psi test; 5” to 6” 7500psi cwp;12000 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service Cementing, fracturing, acidizing, testing, and choke and kill lines. Features Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence; Butt-weld available; 5” and 6” sizes have O-rings for primary seals.

Figure 1002 Hammer Union

Nominal pipe Size:1”, 2”, 3”, 4”,5”,6”;
Pressure Rating: 1” to 4” 10000psi cwp;15000 psi test; 5” to 6” 7500psi cwp;12000 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Cementing, fracturing, acidizing, testing, and choke and kill lines.
Features
Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence;
Butt-weld available;
5” and 6” sizes have O-rings for primary seals.

Figure 1003 Hammer Union
Nominal pipe Size:2”, 3”, 4”,5”; Pressure Rating: 2” to 3” 10000psi cwp;15000 psi test; 4” to 5” 7500psi cwp;12000 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service For high-pressure connections where lines can’t be aligned. Features Ball seat provides positive seal with up to 7-1/2°misalignment; 2” model up to 4°; Replacement O-ring on male sub provides primary seal, and protects metal-to-metal seal against abrasion and corrosion; Available with threaded or butt-weld ends.

Figure 1003 Hammer Union

Nominal pipe Size:2”, 3”, 4”,5”;
Pressure Rating: 2” to 3” 10000psi cwp;15000 psi test; 4” to 5” 7500psi cwp;12000 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
For high-pressure connections where lines can’t be aligned.
Features
Ball seat provides positive seal with up to 7-1/2°misalignment; 2” model up to 4°;
Replacement O-ring on male sub provides primary seal, and protects metal-to-metal seal against abrasion and corrosion;
Available with threaded or butt-weld ends.

Figure 1502 Hammer Union
Nominal pipe Size:2”, 3”, 4”; Pressure Rating: 15000psi cwp;22500 psi test; Connections Type: pipeline thread, tubing thread, butt-weld; Component Parts: Nut, Male Sub, Female Sub, Seal Ring; Sour Service Models to NACE MR-01-75. Recommended service Cementing, fracturing, acidizing, testing, and choke and kill lines. Features Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence; Butt-weld available;

Figure 1502 Hammer Union

Nominal pipe Size:2”, 3”, 4”;
Pressure Rating: 15000psi cwp;22500 psi test;
Connections Type: pipeline thread, tubing thread, butt-weld;
Component Parts: Nut, Male Sub, Female Sub, Seal Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Cementing, fracturing, acidizing, testing, and choke and kill lines.
Features
Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence;
Butt-weld available;

Figure 2002 Hammer Union
Nominal pipe Size:2”, 3”; Pressure Rating: 20000psi cold working pressure; Connections Type: butt-weld; Component Parts: Detachable Nut, Male Sub, Female Sub, Seal Ring, Retainer Segment, Retainer Ring; Sour Service Models to NACE MR-01-75. Recommended service Cementing, fracturing, acidizing, testing, and choke and kill lines. Features Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence; Butt-weld configurations only

Figure 2002 Hammer Union

Nominal pipe Size:2”, 3”;
Pressure Rating: 20000psi cold working pressure;
Connections Type: butt-weld;
Component Parts: Detachable Nut, Male Sub, Female Sub, Seal Ring, Retainer Segment, Retainer Ring;
Sour Service Models to NACE MR-01-75.
Recommended service
Cementing, fracturing, acidizing, testing, and choke and kill lines.
Features
Replaceable, lip-type seal provides primary seal, protects secondary metal-to metal seal, and minimizes flow turbulence;

Butt-weld configurations only

Emballage et expédition

Informations sur la société

FAQ Êtes-vous fabricant ou entreprise commerciale? Nous sommes fabricant et nous pourrions fournir plus de services et de produits techniques professionnels.
Les produits sont neufs ou utilisés, si vous nous faites des plans techniques et de production? Tous nos produits sont neufs, le programme de production vous proposera une fois votre commande d'achat.
Avez-vous des équipements d'inspection connexes? Oui, notre usine est l'équipement de tous les équipements d'essai, et je peux leur envoyer leurs photos et tes documents.
Pourriez-vous me dire si votre prix inclut les frais d'inspection des tiers? Non, notre prix n'inclut pas les frais d'inspection de tiers, et nous noterons dans notre devis.
Arrangeras-tu à installer et à s'entraîner? Oui, installez et déboguez l'équipement;
Former les opérateurs de première ligne sur le site
Où sont vendus vos produits? États-Unis, Canada, Mexique, Venezuela, Colubia et d'autres régions d'Amérique du Sud
Russica, azerbaïdjan et Asie centrale
Émirats Arabes Unis, Arabie Saoudite et Mddle East Counties

Groupes de Produits : Pièces de rechange pour champs de pétrole > Raccords de tuyauterie

Premium Related Products

autres produits

Produits phares

Oilfield API DG SERIES OF Hooks Paniers de ciment API pour outils de cimentation API pivotant standard pour forage / puits d'eau pivotant API YG135, YG170, YG225, YG450 Bloc de crochet de déplacement utilisé pour la plateforme de forage API Hammer Union / Thread Union / Welding Union / H2S Welding Union pour le pétrole et le gaz Tubes en acier API 5CT, tuyau d'huile Pompe submersible électrique de haute qualité (ESP) pour le pétrole et le gaz API Plate-forme de forage standard de la couronne / perçage des blocs de couronnes / bloc de forage de forage Système de contrôle de puits d'huile api vannes à vannes 6a vannes à canalisations d'huile Table tournante API ZP série pour pièces de forage Boîtier et tubage sans soudure API 5CT pour OCTG Centralizateur standard API pour boîtier UNITÉ DE POMPE À TAMBOUR ELECTRIQUE INTELLIGENTE API Threading tubing Coupling Haute qualité API 11B Anti-corrosion creux et solide API Pompe à tubes